.ini for india

can any one help on this . no working .ini in india

Tatasky is available in this thread for donators only.

http://www.webgrabplus.com/content/tataskycom-not-working-now

Are the .ini for India working for anyone seems they are not working yet? Except for tatasky any updates ?

works fine here

I may be wrong here as I am new to this, but for India is tatasky the only one working right now? And if so will it work if I am not a donor ? As seen in the log you provided.
I am getting the following error for all the channels on tatasky

[ Info ] ( 6/2770) TATASKY.COM -- chan. (xmltv_id=SONY SAB) -- mode Incremental
[Warning ] error downloading page: The operation has timed out. (15sec)
[Warning ] Retry 3 of 4 times
[Error ] Unable to update channel SONY SAB
[Critical] Generic syntax exception:
[Critical] message:
[Error ] no index page data received from SONY SAB
[Error ] unable to update channel, try again later
[ Info ] Existing guide data restored!
[ Debug ]

There is also dish tv and others. For tatasky yes you need to be donator see http://webgrabplus.com/content/support-us

Thank you for your quick reply mat much appreciated. But for all others I am getting the error

[ Info ] ( 7/2770) DISHTV.IN -- chan. (xmltv_id=E Vidya 2 [2023]) -- mode Incremental
[Warning ] error downloading page: The operation has timed out. (15sec)
[Warning ] Retry 3 of 4 times
[Error ] Unable to update channel E Vidya 2 [2023]
[Critical] Generic syntax exception:
[Critical] message:
[Error ] no index page data received from E Vidya 2 [2023]
[Error ] unable to update channel, try again later
[ Info ] Existing guide data restored!

Site is very slow so you need to increase timeout : retry time-out="180" it should work faster with india ip

tested one channel , works fine By the way it's always good to make a fresh channel list.

Thank you, will try the same. There are other locales too where I am facing the same error just you can change the site name and rest of the error is same, so are these types of error due to slow sites?

Like i said please run a fresh channel list(use update "c") , if you still have problem tell me site.ini name and the channel and we will look into it

Sure, will do that. Thank you !

cant find out any working siteini file for India on registered user profile
can you please help (d2h.com.E.channels.xml or any v2)

Same here, just out of curiosity what is the error that you are getting ?

no show for d2h, rest all v3 skipped --> encrypted SiteIni

This is what I have been getting back, I just do not understand what is it that I am doing wrong. As suggested I have increased the timeout and update to "c". I am a bit new to this so maybe I am missing something.

( 6/2798) DISHTV.IN -- chan. (xmltv_id=Times Now Navbharat [666]) -- mode I
ncremental
Unable to update channel Times Now Navbharat [666]
Generic syntax exception:
message:
no index page data received from Times Now Navbharat [666]
unable to update channel, try again later
Existing guide data restored!

( 6/2798) D2H.COM.E -- chan. (xmltv_id=GEMINI) -- mode Incremental
Unable to update channel GEMINI
Generic syntax exception:
message:
no index page data received from GEMINI
unable to update channel, try again later
Existing guide data restored!

( 4/2798) INDIATIMES.COM -- chan. (xmltv_id=Z ETC Bollywood) -- mode Increm
ental
iii
no shows in indexpage!

( 3/2798) ZEE5.COM -- chan. (xmltv_id=Zee TV APAC) -- mode Incremental
Unable to update channel Zee TV APAC
Generic syntax exception:
message:
no index page data received from Zee TV APAC
unable to update channel, try again later
Existing guide data restored!

( 4/2798) INDIATIMES.COM -- chan. (xmltv_id=Z ETC Bollywood) -- mode Incremental
iii
no shows in indexpage!

( 5/2798) IN.COM -- chan. (xmltv_id=Ibn Lokmat) -- mode Incremental
iii
no shows in indexpage!

I have similar output for Denmark and Mexico.

you need to be donator to run encrypted, btw d2h doesn't work, as alternative there is https://github.com/SilentButeo2/webgrabplus-siteinipack/blob/master/site...

Here are my files for the same. I understand JIO and tatasky are available only after being a donator and d2h is not working. I have downloaded the latest ini files and which includes https://github.com/SilentButeo2/webgrabplus-siteinipack/blob/master/site... and will test the same but I would like to know what I am missing here.

The error is clear, you need to update webgrab https://github.com/SilentButeo2/webgrabplus-siteinipack/tree/master/eval...
Btw Jio and d2h do not work, there is videoready that is pretty fast.Also the first run use update "c" to produce a new channel list.

Sure, will try the same. Thank you for the reply and being so patient with my questions.

thanks Mat, basically this app is no more free now, I am a home user and want to pull just ~20 channels EPG only.
let me know if anything can work for me as register user

Hi the authors tried to keep it at minimum the cost, infact donation is 5 euro for 1 year including 250 channels.
attached a sample of videoready

After using the latest version and installing all the files required. I am getting the following error. Does this mean that I need to be a contributor to use the latest version ? I have added my username, registered id and password(Liscense passcode) in my WebGrab++.config.example.xml file.

WebGrab+Plus/w MDB & REX Postprocess -- version V3.2.5.1

Jan van Straaten
Francis De Paemeleere

thanks to Paul Weterings, Mat8861, Blackbear199 and all the contributing users
--------------------------------------------------------------------------------

Job started at 20/06/2023 07:50:02
Checking License ..
For License request/update data, see WGLicense.log.txt
Job finished at 20/06/2023 07:50:17 done in 15s

Object reference not set to an instance of an object

at  . ..ctor (System.String ) [0x0138d] in :0
at  .―.  (System.String[] ) [0x0034b] in :0
Unhandled Exception

Hi which version are you using, I ask because I am getting the error that I have mentioned below on using versions 3 and above.

look here http://www.webgrabplus.com/faq#faq_6525

I followed that already, I have attached my config file please let me know if I am missing anything.

use this
https://github.com/SilentButeo2/webgrabplus-siteinipack/blob/master/site...

I have tried that too, I do not understand why I am getting error as follows:
[Critical]
Object reference not set to an instance of an object
[Critical]
at  . ..ctor (System.String ) [0x0138d] in <86e27bf513e345f3b815dd4f534eb13f>:0
at  .—.  (System.String[] ) [0x0034b] in <86e27bf513e345f3b815dd4f534eb13f>:0
[Critical] Unhandled Exception

I have attached the files as a zip for your reference, I have intentionally removed the userid, email and License pass code.
I tried./install.sh and then ./run.sh but it won't run and give the error that is in the log file in the attached zip folder.

I have tried that too, I do not understand why I am getting error as follows:
[Critical]
Object reference not set to an instance of an object
[Critical]
at  . ..ctor (System.String ) [0x0138d] in <86e27bf513e345f3b815dd4f534eb13f>:0
at  .—.  (System.String[] ) [0x0034b] in <86e27bf513e345f3b815dd4f534eb13f>:0
[Critical] Unhandled Exception

I have attached the files as a zip for your reference, I have intentionally removed the userid, email and License pass code.
I tried./install.sh and then ./run.sh but it won't run and give the error that is in the log file in the attached zip folder.

I have tried [postprocess grab="y" run="y"]mbd[/postprocess] (square brackets as tag brackets arent shown here) too.
I have tried https://github.com/SilentButeo2/webgrabplus-siteinipack/blob/master/site...
I am also attaching the directory structure and mdb and rex config files just in case.

Please let me know if I have to donate just to make things work in newer version.

Any updates on this please ? I really need some solution on this I have read various forums posts and tried different solutions suggested on the forum yet no positive outcome. Can you please help me out in understanding what am I missing ?

Update wg++
https://github.com/SilentButeo2/webgrabplus-siteinipack/blob/master/eval...
set update F
set license update to f
Also i see you run in /projects/webgrabplus/scripts/Webgrabplus_V5/.wg++/ check if permission is 755 on all files, are you running as user or root ? You should run as root.

You have 2 channel lines in your config, you must change next line:
c
to
i

That way you can get your guide for those 2 channels.
Also you can increase the time span from 0 (1 day) to 6 (7 days) or 2 (3 days)

0
to
6

Hi, Can you please share your config files. I followed all the steps yet no luck.

Here they are...